Circular saw guide for straight cuts
Circular saw guide for straight cuts, How does the electric circular saw cut the board straight
- To use an electric circular saw for straight cutting, you first need to ensure that the saw blade is installed and adjusted correctly. Before you start cutting, make sure that the saw blade is firmly installed and that the direction of rotation of the saw blade is correct. Next, choose a suitable starting point for cutting, usually on the edge of the board or on a marked straight line. At the beginning of the cutting, keep the electric circular saw stable and avoid moving or shaking the electric circular saw during the cutting process, which can reduce the deviation and ensure the straightness of the cutting.
- In order to further improve the accuracy of cutting, guide rails or linear cutting tools can be used. These tools can help you maintain the straight motion of the electric circular saw during the cutting process, reducing the error of manual operation. In addition, the use of guides can also improve the efficiency of cutting, especially when dealing with longer straight cuts.
- Use a guide ruler: Make a special guide ruler, place it on the board to be sawn, and ensure that the guide ruler is aligned with the saw line. This ensures a straight cut.
- Adjust the position of the saw blade: When setting the distance between the saw line and the ruler, you can use a plywood whose width is exactly equal to this distance. Place one side of the plywood flat on the board to be sawn with the sawing line, then hold the ruler tightly against the other side of the plywood and fix it to the board to be sawn, then remove the plywood and cut along the ruler saw with an electric circular saw.
- Keep the board stable: Place the board on the sawing horse, make sure that the sawing place is outside the support point, avoid cutting between the two support points. Hold the board steady with one foot or knee, making sure the saw blade is not in contact with the board.
- Correct operation of the electric circular saw: When opening the saw, ensure that the saw blade is not in contact with the board. Hold the saw with both hands and push the saw forward to avoid hesitation in the cutting process. At the end of the cutting, push the saw quickly to make the scrap drop suddenly and avoid cracking.
Through the above steps, the electric circular saw can be effectively used for linear cutting to ensure the accuracy and efficiency of cutting. - adjust the height of the saw disc
The height of the saw disc of the electric circular saw is the key, if the height of the saw disc is too high or too low, it will lead to the sawn board is not straight. So before we use the electric circular saw, we need to adjust the height of the saw disc. The method is to use the saw plate just under the board, so that the board and the saw plate maintain the appropriate distance. - adjust the saw disk Angle
In addition to adjusting the height of the saw disc, it is also necessary to adjust the Angle of the saw disc. If the Angle of the saw plate is not correct, it will also cause the sawn board to be not straight. So you need to carefully adjust the Angle of the saw disc. Usually we set the Angle of the saw disc to be perpendicular to the board surface, and maintain a certain Angle of inclination to facilitate sawing. - Pay attention to the sawing speed and stability
In the sawing process, it is necessary to pay attention to the sawing speed and sawing stability, not too fast or too slow, to maintain the appropriate speed and stability. If the speed is too fast, it is easy to have a jagged saw edge; If the sawing speed is too slow, it is easy to lead to the sawing out of the board surface is not smooth, affecting the sawing quality. - Safety measures are essential when operating an electric circular saw. Make sure to wear proper protective gear, such as safety glasses and gloves, to prevent splashes of wood chips or accidents. During the operation, stay focused and avoid distractions to ensure the accuracy and safety of the cutting.
Sum up
The electric circular saw is a very practical tool. It is necessary to pay attention to the adjustment of the height of the saw disc, the adjustment of the Angle of the saw disc, the use of guide and the control of cutting speed and stability. Only under the correct operation method, the board can be effectively sawed straight and ensure the cutting quality.
Click to see more machine of grinding, packing, printing, labels industries.
We OEM your brand and also color box, printed bags, outer box packages.
You can also refer to following links if you are interest in following information:
6 color printing machine 8 side sealing bags AC EV Charger
